5 Mistakes to Avoid When Making Acrylic Display Stands—Lingzhan Display

In production, even the most standardized acrylic display rack manufacturers inevitably make mistakes during fabrication. However, some errors can be prevented or avoided, allowing us to achieve twice the result with half the effort when crafting acrylic display racks. Below, Ling Exhibition shares five common mistakes to avoid during acrylic display rack production.

1. Material Waste: Select appropriate materials, specifications, and dimensions based on client requirements, ensuring precise cutting to minimize material wastage.

2. Surface Scratches: Exercise caution during production. When processing acrylic, guard against surface scratches, as these not only compromise the display stand's aesthetics but can also render the product unusable in severe cases.

3. Preventing warping: When processing acrylic sheets, drill oval-shaped screw holes to secure screws, enhancing strength and reducing deformation. Use elastic rubber gaskets to cushion connections between panels. Additionally, allow for expansion gaps during installation to accommodate thermal expansion and contraction.

4. Polishing Inspection: After polishing, check if any burrs remain on the chamfered edges.

5. Adhesive Failure and Bubble Formation: When using adhesive bonding, verify that no adhesive failure or bubbles occur at the joints and that the structure remains secure.